Reflectorless Total Station

Figure below shows ZTS-320R:

Functions of keyboards and the display of information:

Capability

Microprocessor unit in reflectorless total station processes the data collected to compute:

Average of multiple angles measured.

Average of multiple distance measured.

Horizontal distance.

Distance between any two points.

Elevation of objects and

All the three coordinates of the observed points.

ZTS-320R features:

ZTS-320R data format:

MEA= Measurement File, working for storing data

COO= Coordinate File, being used when transferring coordinate

COD= Code File, being used when transferring code

Select File >File(.MEA) A.MEA File(.COO) File(.LH) Save Enter

LH= LS =Defined line File, working for staking out roadway

How to aim at a target (only for reference)

1.Aim at the bright sky with the telescope and adjust the eyepiece to focus until a sharp image of the cross wire forms.

2.Aim at the target with the cross center in the coarse sighting device on the top of the lens. The eye should keep a proper distance (about 200mm) away from the sighting device.

3.Obtain a sharp image of the target on the reticule with the focusing screw of the telescope. If optical parallax appears when angle of view changed, the focus or the diopter of the eyepiece may be unadjusted. For precision concerns, please adjust the eyepiece focus to eliminate the optical parallax.

Technical parameters:

Angle Measurement

Telescope

Distance Measurement (ZTS-320 with Reflector)

Distance Measurement(ZTS-320R Reflectorless)

Compensator

• 

  Digital Resistivity Meters for Ground Water Exploration

• 

  Surface Wave Seismic Test Instrument

• 

  Geophysical Magnetometer

• 

  500m Water Well Depth Measuring Devices

• 

  14mm 25mm Diameter Water Level Gauge

• 

  Manhole Inspection Camera with High Resolution