Home > News > Content

Contact Us

Add:25F, China Resources Building, Xiejjiawan, Jiulongpo District, Chongqing, 400050 China




Application Of Borehole Inspection Camera
Jan 31, 2019

Application of Borehole Inspection Camera

Lithologic or Stratigraphic Logging

This application of a borehole camera is to view and record stratigraphy and lithology of the

accessed units. There are situations where little is known of the stratigraphy for the area in

question. While the borehole camera is less than ideal for detailed logging of a hole for

lithology, it can allow a moderate level of lithology determination. Sandstones, shales, and coals

can usually be differentiated. Separation of shales and siltstones are also at times possible.

Conglomeritic zones, nodules, and concretions can be easily observed within units with

contrasting color. Lithologic determinations work best with a color camera setup. The use of

lithologic logs for a well bore allows for more confident identification with the camera. While

the borehole camera is not a substitute for good lithologic logs, it can provide lithologic

information when the logs are incomplete or missing. 

Fracture Logging

The location, orientation, rough width (aperture size), and condition (open or plugged) of

fractures can be viewed and recorded. The frequency of fractures within lithologic units, with

changes in depth, topographic location, and well location with respect to geologic structure,

mines, and other salient features are all of interest in these types of investigations. With the right equipment, fracture strike and dip can be estimated. Fracture orientation is of interest because it can yield insight as to the ground-water sources, origin of the fracture (stress relief versestectonic), and degree of fracture interconnectedness. Fracture aperture size is important in

estimating potential inflow rates or possible impacts from mine subsidence. The degree to which

a fracture is filled is important as to whether it can contribute ground water, the type of fill

material or precipitate may be indicative of the water quality yielded by that fracture, or if

biological plugging (biofouling) has occurred. Fracture strike and dip can be important in

determining the types and directions of stresses to the strata.

Well Bore and Casing Integrity

The camera can be employed to observe the general condition of the well bore in terms of

hole off-sets, zones of sloughing, precipitate build-ups, sediment accumulation, or blockages.

The length of casing used in a well, cracks or holes in the casing, casing deterioration, leaking

joints, and casing buckling can all be documented.

Previous: No Information

Next: No Information